The new Bénéteau Flyer 10 is a “smart walkaround”, a new interpretation of the classic boats born in the USA. The organization of the deck from the square bow is original, which leads to excellent circulation on board. Aft two outboard engines up to 350 hp each
To distinguish this ten meters of Bénéteau there is first of all the asymmetrical plan, with the side sidewalk only on the left that leads to the bow, to the large three place sundeck. To get there, the side part of the windshield, also with very squared lines, flips towards the center of the boat.
At the stern there is the traditional living and dining area, with the table that can be lowered and transformed into a further large sundeck. Behind the double driver’s seat there is also a well-equipped kitchen, and the whole area can be protected from the sun by a rigid retractable bimini. The aft deck has been well studied with a double access to the water at the sides of the two outboard engines.
For the Bénéteau Flyer 10 the maximum power that can be installed is 2 x 350 HP exploited to the best thanks to the hull patented by the French brand, the Airstep 2, which ensures a quick glide, but also a high maximum speed that, in this case , exceeds 40 knots. The maximum capacity of this vessel, also designed for charter, the Bénéteau sharing boat is 11 people.
Below deck the cabins are two, the bow that is obtained by lowering the dining table, and the aft with the bed oriented for beam under the cockpit. There is also a separate bathroom.
Bénéteau Flyer 10
Length overall 9,95 m – 32’08’’
Hull length 9,63 m – 31’7’’
Beam overall 3,35 m – 11’
Hull beam 3,32 m – 10’11’’
Light displacement CE 5 243 kg – 11 558 lbs
Ligth displacement without engine 4 332 kg – 9 550 lbs
Fuel capacity 2×400 L – 211 US Gal
Water tanks 160 L – 42 US Gal
Max engine power 2×350
EC CERTIFICATE B8/C11
Naval architects: BENETEAU POWER
Designer: STYLE & DESIGN